Cipia Ltd

Polishing System

1. Apply either AC or RP system primer
2. De-nib with orbital sander and P240 disc
3. Apply second coat of primer if necessary
4. De-nib with P320 disc
5. Apply RP4 system coat on coat to achieve required build (use RP thinners up to 15%)
6. Leave for at least 24 hours to harden.
7. Flat with P1200-P1500 disc to take out any inclusions
8. Using orbital sander and P2000 disc with water, flat the surface
9. Using Farecla Orange Compounding Foam apply a small amount of Profile 300 machine polish to surface of paint and with water Use polishing machine at slow speed adding water throughout.
10. Change the Orange Foam to a Farecla Polishing Foam, apply Profile 500 and repeat process until desired gloss level.
11. Clean off excess compound and apply Farecla Waxtop, buff in with Farecla Microfibre Cloth for the ultimate finish

NOTES

Do not use RP4 in an overly warm environment as this will cause solvent popping which is characterised by the appearance of small bubbles in